On sites with contaminant masses counted in the hundred-thousand to million pound range, it’s imperative you choose the right technology for your remedy.
Thermal technologies are widely used to target high mass contaminated sites where non-aqueous phase liquids (NAPLs) are known to be present. While the geology and hydrogeology of a site typically is a driving factor for technology selection, the mass distribution, chemical composition and thermal behavior of the site contaminants are often the key drivers in determining in which phase the mass is mobilized, and thus the extraction strategy. For VOCs, mobilization in the vapor phase typically fully governs the mass removal. However, for more complex mixtures of high boiling point hydrocarbons, that may not be the case.
In this webinar, Technology Director Steffen Griepke will explain what to consider when selecting and designing your thermal remedy for optimized mass removal. He’ll share best practices and examples drawn from the two decades he’s worked in thermal remediation, and take questions at the end of the presentation.