No results

Search

Blogs

Sampling 102: 4 Ways to Collect Deep Groundwater Samples During Drilling
Sampling 102: 4 Ways to Collect Deep Groundwater Samples During Drilling

Greg Zekoff

Career advice and habits for success for women in environmental services
Women in Environmental Services: Career Advice & Habits for Success

Pictured: an in situ stabilization (ISS) project in progress
4 Things You Need to Ask Every Contractor Before Hiring Them For Your ISS Project

Jon Simpson

Pictured: A driller in a hi-viz vest and hard hat stands at the controls of a sonic drilling rig on a city street.
4 Drillers Share Advice They Got As (and Would Give To) Driller Assistants

Why the Environmental Services Industry Is a Great Place for Veterans to Build Civilian Careers
Why the Environmental Services Industry Is a Great Place for Veterans to Build Civilian Careers

5 Common Challenges on Injection Projects—And How to Avoid & Mitigate Them
5 Common Challenges on Injection Projects—And How to Avoid & Mitigate Them

Eliot Cooper, Casey Moore, Brad Carlson, Eric Moskal, Michael Gerber

VIEW ALL

Brochures

Auger Drilling
Auger Drilling Technology Overview
Drilling on a sidewalk in New York
Environmental Drilling & Sampling Overview
Geotechnical drilling
Geotechnical Services Overview
Hydraulic Profiling Tool
Hydraulic Profiling Tool (HPT) Overview
MIHPT Overview
Membrane Interface & Hydraulic Profiling Tool (MIHPT) Overview
Membrane Interface Probe
Membrane Interface Probe
VIEW ALL

Webinars

Limited Access Projects
Limited Access Projects: How to Do More With Less
Bill Poupis, Shawn Miller

Pictured: Graph comparing relative total site costs of a site characterization using integrated site characterization to the total costs of a traditional site characterization
More Money, More Delays: How to Limit Cost Overruns and Remediation Problems With New Technology & Approaches
Eliot Cooper

How to Select Liquid and Solids Amendments
How to Select Liquid & Solids Amendments and Pumping & Delivery Systems Based on MIHPT Data
Eliot Cooper

The Basics of Planning a Successful In Situ Injection Project
The Basics of Planning a Successful In Situ Injection Project
Eliot Cooper

A graphic with a light bulb in a technology treatment
How to Decide if a New Technology is a Good Bet for your Remediation Project
Eliot Cooper, Craig Bruno, Brad Droy

Sampling 101
Sampling 101: Methods of Collecting Environmental Samples During Drilling
Greg Zekoff

VIEW ALL

Project Highlights

A photo of a brochure
Case Study: Injection of Sodium Persulfate at Active Facility in West Texas
Pictured: A direct push technology (DPT) rig set up to inject CleanER iZVI into the subsurface.
Case Study: Injection of CleanER iZVI at Former Aircraft Parts Manufacturer in Denver, CO
An excavator mixing contaminants in a hole
Project Highlight: MGP ISS Project Sets Record for Client Health and Safety Audits
ISS at former industrial manufacturing site
Project Highlight: ISS to Sixty Feet Below Ground Surface at Former Industrial Manufacturing Site
A table with injection tooling
Project Highlight: Permeability Enhancement via Fracturing in Southeastern US
A photo of a remediation site
Project Snapshot: ISS/ISCO at Former Dry Cleaners
VIEW ALL

Newsletters

A banner for our pathways newsletter
Pathways Newsletter - December 2022
VIEW ALL

Presentations

pneumatic fracturing and proppant injection poster
Battelle 2022 Poster - Pneumatic Fracturing and Proppant Injection to Facilitate Air Sparge-Soil Vapor Extraction of Chlorinated Ethenes in Low Permeability Geology
Effectively Implementing HRSC poster
Battelle 2022 Poster - Efficiently Implementing HRSC and Three-Dimensional Modeling to Improve Remedy Performance
Battelle 2022 Poster - The Transition to Colloidal from Micro-Scale Solids with Further Optimization through Automated Injection
Battelle 2022 Poster - The Transition to Colloidal from Micro-Scale Solids with Further Optimization through Automated Injection
Thermal Remediation Poster
Battelle 2022 Poster - Thermal Remediation: An Effective Solution for Rapid Brownfield Redevelopment
myth busting - ERH vs TCH
Battelle 2022 Poster - In Situ Thermal Remediation Technologies: TCH vs. ERH - Which is Best and Why
Steam it - poster
Battelle 2022 Poster - Steam It - Challenging Waste Oil NAPL Removal in Two Phases using Steam Enhanced Extraction
VIEW ALL

White Papers

Remediation of Complex Chlorinated Solvent Sites
Remediation of Complex Chlorinated Solvent Sites
World’s Largest In Situ Thermal Desorption Project
World’s Largest In Situ Thermal Desorption Project
Thermal DNAPL Source Zone Treatment Impact on a CVOC Plume
Thermal DNAPL Source Zone Treatment Impact on a CVOC Plume
Field Demonstrations Using the Waterloo Ground Water Profiler
Field Demonstrations Using the Waterloo Ground Water Profiler
TCH, ERH, and SEE graphic
Battelle 2018 Platform: If You Have all the Thermal Tools - How Do You Pick the Best One for a Site?
Thermal Treatment - How Much Energy Does it Take?
Battelle 2018 Poster: Thermal Treatment - How Much Energy Does it Take?
VIEW ALL

Other

2021 Sustainability Report
2021 Cascade Sustainability Report
Sustainable Remediation Resources
Sustainable Remediation Resources
Cascade Introduces New Products to Address Chlorinated Solvent, Petroleum Contamination Across the U.S.
Cascade Introduces New Products to Address Chlorinated Solvent, Petroleum Contamination Across the U.S.
Cascade Offers Innovative Solution for Remediation of Chlorinated Solvent Contamination
Cascade Offers Innovative Solution for Remediation of Chlorinated Solvent Contamination
SourceKill Manufacturer Safety Data Sheet
SourceKill Manufacturer Safety Data Sheet
a screenshot of our safety data sheet
CleanER iZVI Manufacturer Safety Data Sheet
VIEW ALL