Webinars

Past Webinars

Ask the Experts: Injected Remedies
11/09/22 Eliot Cooper, William (Brad) Carlson, Eric Moskal, Casey Moore
Ask the Experts: Injected Remedies

No matter how many webinars you attend and white papers you read, you probably still have a variety of questions about different chemistries and injection approaches. If it’s been...

A 3D conceptual site model
09/28/22 John LaChance, Steffen Griepke
PFAS 103: Source Zone Treatment

PFAS remediation is complex, especially with the expectation of treatment standards moving down to one part per trillion. Getting there will take a tiered approach for site...

A slide from our presentation titled, Evolution of eZVI Developed by NASA
09/14/22 Eliot Cooper
Struggling With CVOC Source Zone Treatment? Learn How NASA Figured It Out

Chlorinated solvent source areas pose some of the biggest challenges to remediation practitioners. At most sites, the contaminant mass overwhelms in situ chemical oxidation (ISCO)...

Plume Treatment
08/24/22 Eliot Cooper
PFAS 102: Plume Treatment

Even with successful source zone treatment of soil, PFAS groundwater concentrations remain a concern. How can you cost-effectively address the groundwater plume? In this webinar,...

a chart with amount of mass removed during a remediation project
07/27/22 Eliot Cooper, John LaChance
Lifting the Veil: The Importance of Data Transparency for Remediation

Environmental consultants need remediation subcontractors who are transparent in their proposals for remedial design and approach and during the field application. But that’s not...

Ultimate Optimization: Key Methods for Optimizing Injection Projects
06/22/22 Eliot Cooper
Ultimate Optimization: Key Methods for Optimizing Injection Projects

Many consultants have raised concerns on injected remedies, saying they take too long, are too expensive, and have a hard time achieving their expectations But what if that wasn’t...

Drilling 104: An Introduction to Rotary Drilling
05/11/22 Bryan Nydoske and Mike Mottet
Drilling 104: An Introduction to Rotary Drilling

If you’re new to the environmental and geotechnical services industry, you may not know rotary drilling is a popular and cost-effective choice for many project sites, much less...

How to Design an Efficient HRSC Program Based on Objectives and Data Gaps
04/27/22
How to Design an Efficient HRSC Program Based on Objectives and Data Gaps

Choosing the right set of tools is often the focus of high resolution site characterization (HRSC) program design, but tool selection is only one of three important steps to...

PFAS 101: Characterization Technologies and Best Practices
04/13/22 Eliot Cooper, Rob Danckert and Casey Moore
PFAS 101: Characterization Technologies and Best Practices

In the last two years, there has been an increase in news coverage surrounding PFAS contamination, as well as renewed prioritization from the federal and state governments...

Richmond Thermal Remediation
03/30/22 John LaChance, Eliot Cooper, Marat Goldenberg
Brownfield Success: How to Select the Right Remediation Technology For Your Budget and Timeline

The demand for redevelopment in many cities is at an all-time high, and states and federal agencies are responding by increasing funding for addressing brownfield sites....